Showing 1–16 of 26 results
This machine is mainly used for straightening and cutting mild steel wire, stainless wire, galvanized wire and all kinds of metal wires. Machine consist of straightening unit, feeding unit, cutting unit. Wire can be load automatically after enters the first feeding roller. This machine has the appropriate design, easy operation, high salability.
For cleaning sanding or removing surface defects by means of 2 sanding belts as well as optionally by means of a pressing device 30% more sanding surface than commercially available allows for particularly long sanding belt life and best productivity Suitable for any wire quality Flyer and both sand belt speeds independent and seperate adjustable Noise-proof design on high level Inlet and outfeed sanding belt driven by separate motor (coarse and fine sanding possible) Automatic belt tear control.
It is used to drawing and annealing copper rod. In addition, it is applied to making electric wire.
Flipper Payoff Stand,The simple horizontal type pay-off stand for dry type wire drawing machine The simple horizontal type pay-offs are particularly recommended for low carbon steel wire or middle carbon steel wire rod with diamter range from 5.5mm to 6.5mm The horizonal pay-off beam and structure is made of a sturdy steel beam with tempered…
Full Automatic Coil Nail Machine contains：CHARGING MACHINE ，COIL NAIL MACHINE ，HIGH-SPEED THREAD ROLLING MACHINE 1.Full Automatic Coil Nail Machine ———————— Product Name:Coil Nail Machine Power Supply ( V ):AC380V-440V20 KW Diameter of Nail ( mm ):1.8-4.0 mm Length of Nail ( mm ):25-100 mm Speed ( PCS/min ):2700 pcs/min Pressure ( KG/ m2 ):5 KG…
This wire drawing machine is also called Vertical type drawing machine, is widely used in high carbon steel wire (SAE1060, SAE1072, SAE1072, SAW1080, SAE1082) or middle carbon steel wire production, such spring wires, core wire, bead wire, PC wire, bearing wire, wire rope etc.
Aluminum wire breakdown drawing machine for cable aluminum wire, aluminum alloy wire, thermal spraying wire
The completely equipment included,
Automatic Wire Nail Making Machine 1-6 Inch Best Price
1. High Production. 30% more capacity than common machines
2. Super energy-saving: actual consumption of High- speed nail
making machine is about 7KW,1 ton nail output can save electricity
about 20 degrees; while 2.5 sets of ordinary nail making machine
consumption is 5-6KW due to long slide stroke and multi sliding friction parts
Non-stop dead block coiler
The complete line machinery consisted of payoff stand, mechanical descaler, OTO type wire drawing, and the coiler.
Reversed Bending Descaler For Wire Drawing Prepration Process Mechanical descaling removal is to use of mechanical methods to remove oxides on the surface of wire rods and process them into a state suitable for subsequent drawing. The wire rod is bent through one or more sets of guide pulleys, and the outer edge of the…
how does the Rotating Die Holder work in the drawing machine?
The die box is equipped with a compartment for the dry or wet soap drawing lubrication and a rotating cooling body for the die. The soapbox can be customized, in either square or round shape, depending on each customers’ requirements. However, Lämneå Bruk does recommend the round shape as it allows the wire to be covered in more soap.
Features
to work together with wire drawing machine to take-up finished wire from wire drawing machine onto metal spool or bobbin.
Wire rods are covered with an oxide layer, which must be removed before wire drawing.These machines are integrated with the wire drawing line and are widely used for the production of clean surfaced wires and for the purpose of increasing the wire drawing performance.