-
For cleaning sanding or removing surface defects by means of 2 sanding belts as well as optionally by means of a pressing device 30% more sanding surface than commercially available allows for particularly long sanding belt life and best productivity Suitable for any wire quality Flyer and both sand belt speeds independent and seperate adjustable Noise-proof design on high level Inlet and outfeed sanding belt driven by separate motor (coarse and fine sanding possible) Automatic belt tear control.
-
Flipper Payoff Stand,The simple horizontal type pay-off stand for dry type wire drawing machine The simple horizontal type pay-offs are particularly recommended for low carbon steel wire or middle carbon steel wire rod with diamter range from 5.5mm to 6.5mm The horizonal pay-off beam and structure is made of a sturdy steel beam with tempered…
-
Automatic Wire Nail Making Machine 1-6 Inch Best Price
1. High Production. 30% more capacity than common machines
2. Super energy-saving: actual consumption of High- speed nail
making machine is about 7KW,1 ton nail output can save electricity
about 20 degrees; while 2.5 sets of ordinary nail making machine
consumption is 5-6KW due to long slide stroke and multi sliding friction parts
-
Non-stop dead block coiler
- Drum sizes : diameter 300mm~1100mm, the customers could chose the different size.
- Adopt the frequency conversion motor controller, inch movement, continued movement, with pedal switch control.
- Cooling system : Internal Drum and Die Box, both have the water cooling system. This equipment is using the wind cooling system.
- Provide the X, Y direction straight wheel, adjustable liner and fence ranges.
-
-
how does the Rotating Die Holder work in the drawing machine?
The die box is equipped with a compartment for the dry or wet soap drawing lubrication and a rotating cooling body for the die. The soapbox can be customized, in either square or round shape, depending on each customers’ requirements. However, Lämneå Bruk does recommend the round shape as it allows the wire to be covered in more soap.
-
Features
- High-Speed Double Head design for perfect abrasive sanding at speeds up to 3.0 m/s.
- SDJ-1310 descalers are designed for low, medium, high carbon and stainless-steel rod.
- Rod inlet diameter from 4.75 up to 12mm Modular construction for ease of instruction.
- Multiple units may be installed in-line for progressive rod surface finish applications.
- Quick sanding belt change by single action lever.
- Operator friendly control panel and convenient access doors for superior productivity and ease of use.
- Supplied with dust collector.
-
Wire rods are covered with an oxide layer, which must be removed before wire drawing.These machines are integrated with the wire drawing line and are widely used for the production of clean surfaced wires and for the purpose of increasing the wire drawing performance.
-
The vertical type pay-off system is used for uncoiling wire rod coils with diameters ranging from 5.5 mm to 16 mm and ensures continuous feeding of the line.
-
-
It is widely used in Zinc wire , Pure zinc wire ,Zinc Tin alloy Wire,Zinc aluminium alloy ,wire production, The final products is for Anticorrosion, food, oil pipeline industry.
