Nail Making Machine,steel nail making machine for sale
Automatic Wire Nail Making Machine 1-6 Inch Best Price
1. High Production. 30% more capacity than common machines
2. Super energy-saving: actual consumption of High- speed nail
making machine is about 7KW,1 ton nail output can save electricity
about 20 degrees; while 2.5 sets of ordinary nail making machine
consumption is 5-6KW due to long slide stroke and multi sliding friction parts
Nail Making Machine
1,Long service life,no less than the traditional common nail making machine, for at least
seven years.White belt at low cost and long life which is 5-6 months without an incorrect
operation.
2.Automatic oiling , few lubrication points,much less than traditional machines and other
nail making machines on market.It is still very tidy when operating.
3.High Production. 30% more capacity than other factory machine.
4.No dismantle if not change nail mold specifications which can work for 3 months.
Nail cutter 8-10 months. Punch time is five times than ordinary equipment depending on
the actual using status.
5.Nail cutter do cutting without touch, shear number can reach at least 800 million times
(8,000,000 is the cutting times of wire diameter 2.0mm, rough wire diameter will multiplied);
low noise and no power waste can bring low consumption of nail mold, no crack, no fixed
mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times
punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for
many times at the same cost compared with general equipment.
6.Super energy-saving: actual consumption of High- speed nail making machine is about
7KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail
making machine consumption is 5-6KW due to long slide stroke and multi sliding friction
parts
7.60% labor saving because of its high efficiency. Coiling nails efficiency gains at least
50% with a high-frequency welding machine as each nail is quality product without stuck
and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that
can reduce 40% labor cost.
| Model:D80 | Model:D80A | ||
| Diameter: | 1.7-4.0MM | Diameter: | 1.7-4.0MM |
| Length: | 38-86MM | Length: | 40-90MM |
| Power: | 7KW | Power: | Power:7KW |
| Speed: | 750 PCS/MIN | Speed: | 750 PCS/MIN |
| Model:D80B | Model:D130 | ||
| Diameter: | 1.7-4.0M | Diameter: | 1.7-4.0MM |
| Length: | 25-70MM | Length: | 75-130MM |
| Power: | 7KW | Power: | 9KW |
| Speed: | 800 PCS/MIN | Speed: | 520 PCS/MIN |
| Model:130A
|
Model:D130B
FOR ROOFING NAIL |
||
| Diameter: | 4.0-5.2MM | Diameter: | 1.7-4.0MM |
| Length: | 75-130MM | Length: | 32-80MM |
| Power: | 9KW | Power: | 9KW |
| Speed: | 520 PCS/MIN | Speed: | 520 PCS/MIN |
Reviews
There are no reviews yet.